This is a pair of photoelectric sensors or safety beams that can be used for many applications, automatic gates, doors, barriers, driveway alarms etc.
Ideal for outdoor or indoor use with a range of 15 metres
12v or 24v AC/DC power required with a relay output of 1A max 36V
Normally Open or Normally Closed contacts as standard
You will receive 1 x transmitter, 1 x receiver and fixing kit
Range: <15 m="" 25="" span="">
(In rain, fog and other bad weather conditions, the distance will be reduced slightly)
Infrared emission frequency: 1.92khz
Input Power: 12V ---- 24VDC
Wavelength: 940nm
Input Current: RX 15MA --- TX 30MA
Beam angle: <+ -10%
Use of the environment: -20% to 70%
Maximum load: 1A max 30V
Diameter size: L * W * H 76mm * 49.2mm * 21.6mm
Wiring Description: Four-core cable to the receiver, the two wires to the transmitter, to provide power. (RX Receiver wiring, TX transmitter wiring), NC is normally closed, NO is normally open.
Optimum installation height should be greater than 20CM, installation distance of not less than 2M, infrared protection device should be installed vertically, and in the same horizontal line.